Multiple Network connectivity issue in OpenBSD within VMWware

Only the first NIC of each Virtual machine will work .None of the rest won't.
So added a Virtual Network Resource for that Virtual machine in VMWare Control Panel
But it didn't work this time.Only the first NIC will work
So logged into the VMWare Virtual Console and checked the Virtual Switches and VLAN Settings
It was clear that there is a Virtual Switch named "vSwitch0"
And this switch contains only one NIC as its member which is "vmnic0" in our case.

So I decided to add the second NIC "vmnic3" to this switch. I tried

# esxcfg-vswitch -L vmnic3 vSwitch0

But it created problems.
After this I was unable to access the Local Network,ie the the network connected through the "vmnic0"

So I removed it from the switch and added to the same switch specifying the Portgroup also

# esxcfg-vswitch -U vmnic3 vSwitch0
# esxcfg-vswitch -p VM\ Network -L vmnic3 vSwitch0

But didn't work
So removed it

# esxcfg-vswitch -p VM\ Network -U vmnic3 vSwitch0

Created a new switch

# esxcfg-vswitch -a NewSwicth

Then added the Portgroup named "VM Network_VSNL" that is to be used by the Virtual machines.

# esxcfg-vswitch -A VM\ Network_New NewSwitch

Then brought up the "vmnic3" as the Physical UPLINK

# esxcfg-vswitch -L vmnic3 NewSwitch

Then logged into Virtual Infrastructure Client 3

Powered Off OpenBSD
Edit Settings -> Network Adapter 2
Change Switch from "VM Network" to "VM Network_New"

Power On
Then configure the second NIC(pcn1 in my case) in OpenBSD
# vi /etc/hostname.pcn1
inet 192.168.0.222 255.255.255.0 192.168.0.255

Configure gateway and DNS Servers if required
# vi /etc/mygate
192.168.0.254
# vi /etc/resolv.conf
192.168.0.254

Then restart the network service
# sh /etc/netstart

Thats all